Select Page

How to Fix Error E225 in canon printer?

Error E225 is very common in Canon printers. In this post, we will explain the reason behind the E225 error, and methods to resolve error E225. in our last post we have explained how to fix canon Printer in an error state using simple methods.

What is error E225 in the Canon printer?

The error E225 comes because of Contact Image Sensor (CIS) lamp fault. CIS lamp comes in the color of white, red, green, and blue. You can see that lamp when you turn on the printer. If it fails to show, then better to replace its CIS unit.

How the error E225 occurs in the Canon Printer?

If you get this error in your PC then consider that there is a fault in your system operation. If you are wrongly installed or uninstalled the software, at that time it occurs. There may be a chance of invalid entries in the Windows registry. The main reason for this is that it happens because of improper or force shutdown in a hurry or sometimes because of power failure.

Fix error E225 in Canon Printer

With the help of a repair tool, you can scan any computer or laptop with the windows. For that, you have to download the repair tool and you can get from its websites and avoid the error E225 in your canon printer system. It will help you in finding the hidden malicious file from your computer. If you are finding ways to resolve the error E225 in the Canon printer, then you are in the right place. Follow the easy steps below to fix error E225.

Step 1: First of all, Power off your Canon Printer once by pressing on the power button. After 10 minutes switch it on again. If it still shows the error then you should keep continuing with these methods to fix it.

Step 2: Before heading to the next process, make sure you download the repair tool, and better to save the file on the desktop so that you will get it easily. Otherwise, you have to find it where you have saved the file. to download the file just use canon.com/ijsetup or ij.start.canon to download the software.

Step 3: After the download gets completed the repair tool will navigate the location of the file and after that double click to open it. Later on, the system will start the installation process. After that, you will get the User Account Control where you can run the program. To run the program you have to click on the yes button to continue.

Step 4: Later on, after running the program, you will get to see the welcome screen as the initial screen of the launch of this program. The next thing is the repair tool will scan automatically. After that click on the install button for the installation process.

Step 5: In this step, your tool will automatically get installed and the necessary updates will get downloaded. But before all that, make sure you have a better connection with the internet so that it will not get interrupted in the middle.

Step 6: You do not have to do anything in this step also, because the repair tool will scan your overall machine automatically and it will not take much time.

Step 7: After the scanning process gets completed, you will get to know about all areas of the PC which are got damaged with the help of a repair tool. You will also get to know their repair is required or not. If any of the areas of the PC requires the repairing process, then click on the start button of the display which will be in the right corner of the bottom.

Step 8: Once you complete your process and get done by it, the repair will get fixed. All you need to do is restart your computer to finally complete this process. There is a hundred percent chance of getting resolved this system error E225 of canon printer.

So these are all the easy steps you can follow to resolve the system error e225 in your canon printer. I hope this will work for your printer. If in case, it still shows the same error then you can reset canon Printer or simply contact to support department of the canon printer to get this error fixed for you. You can find solutions for any kind of error from Support departments only by calling them as they will be available for 24/7.

How to Fix Error E31 on Canon printer

How to Fix Error E31 on Canon printer

There are many issues that can get your canon Printer into error E31. Today in this post we are going to help you Understand & fix Canon error e31.

What is Canon error E31 ?

This error is a Mostly indicator of a failed wireless setup. It’s Common to have Glitches and error while connecting devices using wireless.

Steps by the technical experts of the Canon printer

  1. First of all, tap the black button on the Canon printer.
  2. If you have set up the WPS connection newly, then make sure to inspect the security setting again and start the set up again. 
  3. After all, check its IP address and the connection whether it is working properly or not. 
  4. The main thing is to keep its IP address very simple.

Setup WPS connection in Canon Printer

  • The error of E31 mainly occurs when the printer fails to connect with the wireless connection. So, to set up the WPS connection, firstly make sure that you have turned on the printer. 
  • Tap and hold the Wifi button for at least 30 seconds which will be on the top of the printer. Release it once the alarm lamp flashes out. 
  • Then look at the lamp next to the button, it should be blue in color, or else you cannot access the point. If it appears a blue color, then click on the button just for 2 minutes. you can also connect canon printer to mac laptop using different methods.

Make sure to check the wire connection

Before going to the further steps, if you are using the wire in your printer then always make sure you have inserted the wires properly. Sometimes, the connectivity of the computer occurs from the cable. If your printer id unable t turn on, then the issue with being the cable. So always inspect the cable connectivity to the computer and printer. Both computers and printers should be kept in a small distance so that there should not be an issue in the cable reaching the computer. If
the error is showing, then you should power off the printer and try to reconnect the cable and then start. If the cable is broken then replace it with a new one.

Make sure to check the wireless connection

Anyways, if you are using the wireless printer, then make sure that you have connected properly. Still to clear the doubts, just change the ID and passwords and re-connect the Canon printer. Always look into the printer’s wireless connection whether it is turned on or not. Most of the printers have the button where you can see the blue wireless icon when the printer avails
the wireless feature. you can reset canon printer to default settings & get started from the start. For any further information, you can anyways contact the customer service which will be available 24/7.

Update the driver

Sometimes the error E31 in the Canon printer can occur from the drive as well. You have to check often whether the driver is outdated. It might occur because of the outdated version of the Canon printer. So if you find this issue, then quickly update by going to ij.start.cannon to download the canon driver, or else you can call support to resolve the error E31.

Troubleshoot the Canon printer

Troubleshooting can fix the multiple problems of any printers. It also helps in working smoothly and can get the best experience in just 2 minutes. So below are the steps to troubleshoot the error E31 in the Canon printer.

Step 1

First of all, plug the power cord into the socket. And check all the wires, cables and USBs are connected properly with the printer.

Step 2

The second step is you restart your computer and try connecting to the printer. Make sure that your printer is properly recognized by your system that is connected to it.

Step 3

Afterward, click on the start button on the computer and search for Control Panel. Then click on it and you can see the options of Printers and Faxes, just click on it.

Step 4

If the Canon printer is not appearing on it, then click on the Add printer option to add your printer to the system.

Step 5

Try uninstalling the Canon printer software that came up with the printer and reinstalls the software. When you download it, then you will get the latest version of the software.

Step 6

Later on, open the software and click on the properties or options. You can find there test alignment button, just click on it or else you can clean the print head thoroughly.

Step 7

Let the printer finish its alignment and then try to print. It will make your printer work. If it still fails to work and connect, then better to contact for support. if the error still persists & if the Canon printer is still in an error state then Your problem will definitely get solved by the technical experts.

So, these are the following steps to resolve the error E31 on the Canon printer. From all these methods, troubleshooting can help you in any kind of errors and problems you will face on printers while using. If any of these steps don’t work, then you can call the support to get the error E31 resolved. They will give the best possible assistance to get fixed.

How to Fix code 5 145 61 In canon Printer

How to Fix code 5 145 61 In canon Printer

Error 5,156,61 is quite common with Canon Printers. We believe that you too must have encountered this error. If yes, then we are sharing the step by step method to resolve error 51566

How the error 5,156,61 occurs in the Canon printer

Error 5,156,61 occurs usually when you try to scan any document, then the error message displays “the scanner is turned off or the USB cable is disconnected”. But you can easily resolve this error by easy solutions.

Fix Canon Error 5 145 61

Remove the connection of USB with available extension

Step 1: First of all, to fix the scanner issue, make sure you have unplugged the printer’s USB cable. It is advised that you should remove USB Hub or any extension if it is using currently in printer. It is better to remove the power cord from the wall socket and reconnect it.

Step 2: Afterward, connect your printer directly into your computer preferably directing the ports to the motherboard

Try using another cable

Step 1: First, carefully look at your printer’s USB cable whether it has any visible problems, any imperfections, any oxidation faults, or it is extended more than normal.

Step 2: Check whether you can use this USB cable in any other printer just for confirmation.

Step 3: After checking also, if you find that it is not functioning properly then you need to change the USB cable.

Uninstall and reinstall the driver

Step 1: You should uninstall all drivers of printers

Step 2: And then you are required to disconnect the power source wire.

Step 3: You are required to download all of those printer drivers which are very much compatible with the printer.

Step 4: After all, install the new drivers for the Canon printer. go to canon.com/ijsetup to download canon drivers & setup it.

Changes to do internally in computer

  • Click on the start button, and search for the control panel, and click on it.
  • There you will see Devices & Printers, just tap on it.
  • Remove the thing that is related to Canon including fax. You just have to highlight it and click on “Remove Device”.
  • Another thing that you have to also remove all Canon printer ports from going to the printer server settings which you can get under the ports tab. Remove any Canon entries by simply scrolling till the down.
  • Open the Windows file explorer or else you can go to the “Computer” icon. You have to search for traces of Canon entries if any leftover.
  • Once you find that all of the traces have been removed successfully, and then restart your computer. Don’t try to plug in the scanner with the help of USB.
  • After restarting your computer, open the web browser and head to the Canon official website, and from there download the correct printer or scanner driver software that will be comfortable with your printer. Later on, simply install it.
  • Always make sure you download the correct software for your printer.
  • Make sure you follow all the given instructions properly to install the printer and even sometimes it will ask for switching on the printer and similarly to connect it. Check now! It might work properly now without showing the error

So, these are the following steps that you can try to resolve the error 5,156,61 in your Canon printer. It will hopefully work on your system. But in case, after using these methods your printer is still showing the same issue, then we would recommend you to contact support department of the Canon printer. They will clear all types of problems you get in your Canon printer.

How to Fix Canon Printer Error 5200?

How to Fix Canon Printer Error 5200?

Did You Get Printer error has occurred  Error 5200 On Your System Display  & now all you can see is Canon Printer error 5200? it  May Have Stopped the Printer from printing Or The Print Quality has been Worse Or Regardless of any other issue, You are reading this Post because of Canon error 5200. Today we will help you understand what is Error 5200 is for canon Printer & How to fix it in easy Steps. 

Usually, error 5200 indicates Low Ink Levels Or Defective Cartridges However there are other factors that could result in canon error 5200 such as – 

  1. Non-Compatible Ink Cartridge 
  2. Low Ink Level 
  3. Defective Ink Cartridge 
  4. Clogged Print Head 
  5. Unregistered Product 
  6. Failed Or Corrupted Canon Driver

Let’s Try to Address the Problem Starting with basic checkups & Troubleshooting.

Fix Canon Error 5200

  • Usually Canon Printer May Signal your computer Or Printer Display to show you Low ink Warning Still Turn off the Printer & Check the Ink Levels by taking out the cartridge & Examine is carefully For ink Levels. 
  • Always Use Branded ink Cartridges Provided by Canon for Best Quality & Compatibility.
  • Refill Or Replace ink Cartridges if the Ink Level is Low 

Note – Please Understand That When the ink is Dry Or Ink Cartridge has low ink levels canon Printer is Programmed by default to mix Colours From Other ink cartridges & Print in black So Don’t Just Change the Colour Ink Cartridges & Try to check ink levels before changing an ink cartridge.

  • Replace ink cartridge if you Find anything defective about any of the cartridges. 
  • Restart the canon Printer along with the computer & see if the error 5200 is gone.

Clean the Printhead

Perform a Nozzle Check & clean the Printer Components Carefully 

Use Hot water & cotton cloths to clean the clogged ink cartridges Or Printhead go to How to clean canon Printer Printhead & cartridge 

Reset The Canon Printer

There are Users Who reported that even after replacing Or refilling the ink in ink cartridges there are Low ink levels warnings that won’t go away so Its About time we tell you How to Reset the Printer back to default settings

First, we Tell You How to Reset ink levels & if that Won’t work then We Recommending hard Reset canon back to factory defaults 

Ink level Reset –  Open the computer

  • Go to control panel>Printers & scanners
canon printer properties
  • Select your canon Printer>Right click on it > Go to Properties >Find the Low Ink Warnings & Click on to exit the Utility & Restart the printer.
reset low ink level

Reset Canon Printer

  • Please press the power button to turn off the printer.
  • Hold the “Stop/Reset” button while pushing the power button. While still holding down the power button, release the “Stop/Reset”  button and then push it Three Times in a row.
  • Wait for 30 to 40 seconds until the LED shows 0.
  • Push the “Stop/Reset” button four (4) times in a row.
  • Push the power button twice.
  • Turn off the printer by pushing the power button one more time. The Canon printer Should be reset.

Now Once the Canon is Hard Reset it’s Time we Reset ink cartridges – 

  • Please Turn off the canon & Unplug the power and the USB connection from the printer.
  • Open the Printer Cover Then Open the cartridge door and hold down the power button.
  • Reconnect the power cables while still holding down the power button.
  • Close the cartridge door and release the power button. The ink cartridge is now reset
Reset ink cartridges

See if this solves the Canon error 5200 Problem. 

Fix Canon Software Problem

Some Users have Re[ported that registering Or Updating the software may also solve the canon error 5200 Please Give it Try. Please Download canon Utility Driver & Register the Product Or Update the driver.

When Nothing Works We recommend Uninstalling the current canon Printer driver & go to the Official Canon Website to download the latest Canon driver & re-configure the Printer.  in this way you can also learn how to connect the canon printer to mac computer.

When none of the Methods Helped You Fix canon error 5200 then it’s time you contact Support & see if Anything Can be done about it. Do Let us know your feedback & suggestion About Our Guide. Please Comment Below & let us know if you need any other help Fixing Canon Printer Error Codes.

Good luck …Cheers 

How to Fix Canon Error B203?

How to Fix Canon Error B203?

Are You unable to Print Using Canon Printer Because of An Error? Upon Trying To Print Using Canon Printer Do You See Canon Error B203 saying to turn off the printer and contact the service center? If Yes then this Post is Just the Thing You need. because we are Presenting You With a complete Guide on How to fix Canon Error B203.

What is Error B203?

Error B203 in Canon Error Indicates Internal Hardware Failure However Software Could also be a factor Behind the Problem Specific Reason for the error B203 is Unclear. Although Based On The Experience of Many of Our Techies & Customers we have compiled a list of the Probable Cause Behind the Error B203 in Canon Printer. 

  1. Damaged Or Clogged Printhead Or Ink cartridge.
  2. Latest Firmware Update Or Corrupted Canon Driver
  3. Voltage Or Temperature Is High Or Fluctuating
  4. Wrong Printhead Alignment  Or Not Properly Seated Cartridge 
  5. Empty Ink Cartridge Or incorrect Installation
  6. Paper Jam Or Foreign Debris Stuck Inside the Printer

Note – As we Are Familiar With the Problem Now We Have Provided Similar Fix For Canon Error B200 In Our Previous Post & it Seems That This Post May also be Helpful to Contribute While Fixing Error B203. Many Canon Users Who Quit On their Printer Should Always Read this Post Before Deciding For a New Printer Or Repair. This Post might be the Best thing You Get on the Internet Today. Please Read it Till Last & Fix Your Printer Without Any Costly Repair Or Buying a New Printer.

Now That We Have Crossed the Part where You understand the Problem Be advised that Knowing the Problem Only Gets half of the job Done So Now its time for Us to Move towards a Solution. 

Pro Tip – Always Start With Basic Troubleshooting While dealing with Technical Devices Such as computers, router, Printer, etc. Please Choose to Reset canon printer to default settings & start over.

How to Fix Canon Error B203 

If you have been reading Our Other Post you may have Noticed that Performing power cycle & cleaning the Printer Has always been Our Basic Troubleshooting & Trust me Half of the Time it Works. So Let’s Begin 

  1. Turn off the Canon Printer & disconnect the Power Cable From the Source.
remove paper from canon
  • Remove the Printer Cover carefully & Press the Key at the top of the cartridge carried to take out the ink cartridges gently. 
remove ink cartridges
  • Replace Any Empty Ink Cartridges & Always Buy Good Quality of Ink Cartridge.
  • Use a Cotton ball or Microfiber cloth Soaked in Alcohol Or Neutral Detergent to Carefully Clean the Printhead & ink cartridge. 
clean Canon Print head
  • You Can Use Hot Air Dry It OR Leave it in Sun Light for 20-30 Minutes to get Dry Or Try Using a Cotton cloth to dry it Out.
  • While Printhead & Ink Cartridge is Out of the Printer carefully Examine & Remove Any Dust, paper Jam, clip Or Any Debris Causing the error. 
  • Try Moving the Print Carriage to The Left & Make Sure Nothing is blocking the way However Don’t Apply to Force if It’s Stuck  
  • Now Plug everything back Together & Make Sure Printhead alignment is Correct. 

See if this May Error B203 Go Away. Now if you have Gotten into this Printer Error Right After a Firmware Update then You Should have a Different Approach to the Problem. The Next Steps Would Also Help You Fix Wrongful installation/Incorrect Driver Issues as well. So Stay Tuned-

Remove/Reinstall Canon Driver

  • Go to Your Computer Installed Program List & Uninstall the Canon Printer Driver Or Use Any Third Party Uninstaller to completely remove the canon Driver.
  • Restart the Computer & Go to Settings>Devices>Printer & Scanner & select Your Printer. Please Remove it From the List. 
  • Restart the computer One More Time & Go to the Official Canon Website & download the correct version of the Software. Run the application as Administrator & Setup the Canon Printer as a Brand New printer With Latest Software from scratch. Hope it Works to clear Out Error B203 Because if Not then the Next Tip is Unusual- 
  • if you need any help connecting canon to mac computer please do contact us.

Scan Using Canon Scan Utility 

While Downloading the Printer Driver From canon Website if you have downloaded & Installed the Canon Scan Utility Then Its Great OtherWise go to the official Canon Website & download the canon Scan Utility & install it. 

Once installed Open the canon Scan Utility & try to scan a document With Scanner Glass Or With the  Paper Feed Tray. Click on start scan to Begin the scanning. If you encounter the error B203 Or Any Other Canon Error Please Click on Fix Now 

Let the canon Utility Perform a checkup & Auto Troubleshooting of the Problem In the Meantime Lets Move to Another Important Set of Tips to Fix Canon error B203. 

Perform a checkup

  • Restart the Printer Once in While & Plug it With the Legitimate Power Source.
  • Run a full antivirus scan of the computer & Printer files & Remove any junk Or Malware attached to it.
  • Do Not Overheat Or Overload the Printer With Lot of Print Jobs. Use the Printer According to Its capacity.
  • Always Refill the Ink cartridge on time to Avoid any errors 
  • Perform a Deep cleaning of Printhead 
  • If None of the Tips Worked For You then Maybe it’s time for you to Contact Canon Customer Helpline Or Buy a New Canon Printer.

If you have Any Query Related Any Other Canon Error Or You Need Help With Canon Printer Setup Just contact us & We Will Answer the Question ASAP. 

Thanks for Reading Do Share Our Post if it was helpful to You. Thank you for taking time to read the post. Good luck 

How to Fix Canon Error E02 & E03?

How to Fix Canon Error E02 & E03?

This post is all about Canon Error E02 & E03 Its Support Codes. Did Your Canon Printer has Quit Reading On Paper Because of Canon error E02 Or If You Have Support Codes Such as – 

  • Support Code 1000
  • Support Code 3442
  • Canon Code 3443,Code 3444, Code 3445

On the Other Hand Error E03 Represents Support Code 1203 & Code 1300

All these Support Codes Are Associated With E02 Error Code So let’s Get to the Know the Problem Before we Begin to resolve it- 

What is  Error E02 & Error E03 

Both errors are Quite Similar In Regards of Symptoms & Fix so we decided to Help You fix it in the same Article. Error E02 is Mostly Related With Paper Problem & Error E03 Indicate Cover is Open Or Paper Jam. There Could  Other Factors to Play a Role in Generating these Errors So let’s List them Out Before We Explain How to Fix them- 

  • Paper Not Inserted Or Placed Properly 
  • Wrong Paper Size 
  • Overheating Or Voltage Temperature Issue 
  • The printer has Run Out of the Paper
  • Cover is Open
  • Overloaded Printer Numbers 
  • Incorrect Paper Type & size 
  • Duplex Printing 
  • Stuck Or Clogged Paper Roller Feed 

Fix Canon Error E02 & E03

Starting With the Basic Move we are going to assist you to fix the issue. Understand that All this Problem Need is Little Troubleshooting With Care So Follow the Steps One by One – 

  • Turn Off the Canon Printer & disconnect it From the Power Outlet
turn off canon printer
  • Open the Printer Cover & Take Out All the Paper From the paper Trey
take the paper out
  • Use an Air Dryer to Remove Small Paper pieces & debris From Inside the Printer
  • You can select the Paper Size Using The Paper Size Key on the Printer Or Go to the Printer Properties & change it manually 
  • Let the Printer Cool Down a bit & Always Place it At Normal Temperature &  Keep it dry.

Clean Paper Feed Roller

clean Canon Paper Feed Roller
  • Use a Dry Cotton Ball Little dipped in soapy water to clean the Paper feed Roller  & then Brush it gently With Dry Cotton Cloth.
  • Plug everything back together & Keep the Papers Out for Now 
  • Restart the Printer & Once start Printer is Starting to Boot Again Please Press Maintenance key on the Printer Multiple time Back to back.
  • Printer Roller Will start Rolling & Since there is No Paper in it Will be just a Test Run To Ensure Roller is Not Jam.
  • Press the Copy  Key 2 Times Once Your Printer is In Maintenance Mode & You Can Confirm it By Seeing B in Printer LED Display 
  • Now Press the Stop Or Reset Key to Stop the Process & restart the Printer. you can also reset canon printer to default settings.

Fix Paper Problem

Always Use the Correct Size & Number Of Papers, Check Your Printer Manual & Make sure what type of Paper your Printer Print On.

  • If the Printer Cover is Open it may Send the Signal Out as an error.
  • Press Ok Key Multiple Times to fix the issue.
  • Insert the paper Inside the Printer & Make sure the Paper is Aligned 
  • Clear the paper path & Make sure Roller is Feeding the Paper & Nothing is Blocking it.
  • Don’t Forget to Close the Printer Cover Properly & Try to Print Using Printer again.

If All of this did not solve the Canon error E03 Or E02 then it could be the Print head So Give it Shot to Troubleshoot the Printer. Sometimes the canon printer is in an error state that might confuse of give out a false alarm.

Clean the Print head

  1. Turn Off the printer & take out the Power Cable.
disconnect printer from power
  1. Pull off the Printer Cover & ink cartridge Gently from the ink Holder.
  2. Remove the Carriage & Clean the Printhead With Hot Water.
  3. Plug everything back to the Printer & See if the error is disappeared. 

See this Helps you fix the Canon error E03 & Error E02. Please Do Contact Canon Customer service  If you need Any Further help Related To Canon Printer Errors.

Comment Below & let us know if have any Feedback Or Suggestion Until Then Cheers